Category Archives: Tutorials

Management And Entrepreneurship For Engineers

By | December 13, 2017

Management And Entrepreneurship For Engineers Explained In Detail Let’s start to learn management and entrepreneurship for engineers, Disclaimer– The content provided here is not copied from any institutional textbooks or lecture notes. You can check copyscape.com to ensure unique content. “management and entrepreneurship for engineers“. MATLAB Tutorials Sampling Theorem Verification MATLAB VHDL Tutorials HDL Code To Simulate… Read More »

Sampling Theorem MATLAB Verification

By | December 6, 2017

Sampling Theorem MATLAB Verification  Logic used in Sampling Theorem MATLAB To get Sampling figure1  Generate analog signal. Plot this analog signal into the figure1.  Generate undersampled signal. Plot this into the figure1. Generate critical signal. Plot this into the figure1.  Generate oversampled signal. Plot this into the figure1. To get Reconstruction figure2 Plot the analog… Read More »

HDL Code To Simulate Full Adder

By | December 3, 2017

HDL Code To Simulate Full Adder Aim –Simulate Full Adder Basic concepts to understand simulate full adder Basics of Verilog Code  Full Adder Theory Verilog Code For Data Flow Modeling Verilog Code module fa2( input a,b,c, output s,cout ); assign s=(a^b^c); assign cout=(a & b)| (b & c)| (c & a); endmodule In data flow modelling,… Read More »

HDL Code To Simulate 1-Bit Comparator

By | December 3, 2017

HDL Code To Simulate 1-Bit Comparator Aim –Simulate 1-Bit Comparator Basic concepts to understand simulate 1-bit comparator   1-Bit Comparator Theory Input – a ( 1bit binary 1 or 0), b( 1bit binary 1 or 0) . Output- l, e, g. l=1 when a=0, b=1. e=1 for two conditions, a=0  b=1, a=1 and b=1. g=1 when a=1, … Read More »

HDL Code To Simulate 8:3 Priority Encoder

By | November 30, 2017

HDL code to simulate 8:3 priority encoder Aim –Simulate 8:3 priority encoder  Basic concepts to understand simulate 8:3 priority encoder Priority Encoder Theory In priority encoder, there are 8 inputs, 1 enable signal and 3 outputs. In this program, we are using [7:0]i==i[7], i[6], i[5], i[4], i[3], i[2], i[1], i[0] as inputs. en – enable signal [2:0]y… Read More »

HDL Code To Simulate 4-bit Binary To Gray Converter

By | November 29, 2017

HDL code to simulate 4-bit binary to gray converter Aim- Simulate 4-bit binary to gray converter using HDL code. Basics of 4-bit binary to gray converter what is gray code? A Gray Code represents binary encoded number constitutes a sequence of bits such that only one bit in the group changes from before and after.… Read More »